Direct answer: Reconcile card or ACH invoice payments in three layers: the full amount the customer paid, the fees and adjustments recorded by the processor, and the separate net payout deposited to your business bank. A contractor's customer typically deserves credit for the successful gross payment, not merely the smaller amount that arrives after processing fees. A mismatch calls for inspecting the processor's balance transactions, payout batch and bank entry before asking the customer to pay again.
Why the Bank Deposit May Be Smaller Than the Paid Invoice
Online invoicing brings money to the contractor through several records. The invoice says what the customer owes for the approved work. A payment transaction confirms what the customer successfully paid. The processor may deduct its fees and combine multiple transactions into one bank payout, often on a later date. The same $1,250 customer payment can therefore correspond to a smaller bank deposit without leaving any balance on that customer's fully paid invoice.
The difference is not necessarily just a percentage fee. A payout can also contain refunds, disputes, adjustments, reserves, currency conversions or earlier transaction balances. Stripe's payout transaction guide describes how to inspect an automatic payout's constituent balance transactions. Check the actual account and report before assuming which line explains a shortfall.
Do not confuse gross, net and bank arrival. A processor showing the payment as successful does not guarantee the bank has posted the payout, and a payout arriving late is not proof the homeowner failed to pay.
Seven Terms to Identify on Every Payment Report
- Invoice face value: The amount billed for approved services and materials, before subtracting any subsequent customer payments.
- Gross customer payment: What was successfully collected from the customer for that transaction.
- Processing fee: A charge associated with accepting or processing the payment, according to the provider's actual statement.
- Platform application fee: A possible separate fee charged by a platform using connected accounts; whether it applies and who bears it depend on the integration.
- Processor balance transaction: The provider's record of the payment, fee, refund or adjustment changing the account balance.
- Payout: A transfer from the processor's balance to the merchant bank account, sometimes combining several charges and adjustments.
- Reconciliation reference: A transaction ID, invoice number, payout ID or job number that lets the bookkeeper identify what was included.

Worked Batch: Two Contractor Invoices, One Net Payout
The following amounts are hypothetical and demonstrate the bookkeeping arithmetic, not any live processor's processing rate. Assume two contractor invoices have been paid in full and their transactions are grouped into one automatic payout, with no refunds, reserves, adjustments or other fees.
| Payment | Customer gross payment | Example fee | Net available from transaction |
|---|---|---|---|
| Plumbing invoice A | $1,250.00 | $37.50 | $1,212.50 |
| Roof inspection invoice B | $780.00 | $23.40 | $756.60 |
| Combined payout | $2,030.00 | $60.90 | $1,969.10 |
Math check: $1,250 + $780 = $2,030 gross paid. Processing fees of $37.50 + $23.40 = $60.90. Therefore $2,030 − $60.90 = $1,969.10 net, assuming every net balance transaction belongs in this payout and no other adjustments apply.
The plumbing customer has paid $1,250 and the roof-inspection customer has paid $780. Do not send either one a reminder for the deducted fees: those are the merchant's costs under this hypothetical arrangement. If the bank entry is only $1,940 instead of $1,969.10, investigate the unexplained $29.10 using the actual payout transaction breakdown, not a random late fee on either customer.
Partial Payments: Fees Do Not Reduce the Customer Credit
Separate hypothetical example: A handyman invoice is $1,200. The customer makes a successful $500 part-payment, leaving $700 of the job balance unpaid. Suppose the processor fee is $15 on that payment—an illustrative fee equal to 3% of $500, not a claim about the provider's rate. The merchant might receive $485 in the related net balance, yet the invoice must reflect the customer's full $500 payment.
| Entry | Amount | Effect |
|---|---|---|
| Approved invoice | $1,200 | Original customer balance |
| Confirmed part-payment | −$500 | Credit customer at gross payment |
| Remaining customer balance | $700 | Still owed by customer |
| Hypothetical processing expense | $15 | Merchant cost recorded separately |
| Net transaction amount | $485 | Subject to payout grouping and adjustments |
The statement “$500 minus a $15 fee means the customer only paid $485” is incorrect. It would overstate the customer's remaining invoice balance by $15. Track both the gross amount credited and the processing cost as different facts.
Reconcile in This Order: Invoice, Payment, Processor, Bank
- Start with paid and partial invoices. List invoice number, job, customer, gross billed, and payment reference. Verify the payment was successful, not merely authorized or processing.
- Export the processor's balance records. Use the available fee and payout reports from the actual merchant account. Stripe explains its Fees Report and Balance Summary export.
- Match gross charges. Link the payment ID and amount to the right job invoice. An invoice with more than one payment should have each customer transaction credited once.
- Identify costs and offsets. Record per-transaction fees, applicable platform fees and any separate refunds or dispute entries.
- Inspect the payout composition. If the provider offers automatic-payout reconciliation, match the included balance transactions to that payout's ID. Manual payouts may not have a direct transactional mapping.
- Match the bank statement. Find the payout by date, amount or bank trace reference and document any delay between processor payout status and bank arrival.
- Investigate differences. Do not invent a balancing entry; locate the missing fee, return, reserve, transaction from another period, or payout with a different scope.
Keep the report's currency and time zone consistent. A late-night charge may appear in the next day's settlement cycle. When using connected accounts, make sure you are reconciling the correct merchant's balance, not combining platform and connected-account activity as though they were one bank account.
Why the Payout Can Differ: The Exception Table
| Transaction or condition | Effect to investigate | Document to check |
|---|---|---|
| Successful full or partial charge | Gross payment increases merchant balance; fee may reduce net | Payment ID and balance transaction |
| Processing or platform fee | Cost decreases net, but not customer's gross payment credit | Fee report and account-specific fee setup |
| Refund | Negative balance movement; provider refund-fee treatment varies | Refund ID, original charge and actual fee record |
| Dispute / chargeback | Funds may be debited or held; extra fees depend on case and account | Dispute dashboard and associated balance entries |
| Reserve or temporary hold | Some amount unavailable for a payout; release may occur later | Reserve and balance activity |
| Currency conversion | Currency and exchange adjustments alter net | Transaction currency and FX report |
| Payment after payout cutoff | Charge belongs to another payout cycle | Available-on date and payout grouping |
| Manual payout | A manual transfer is not necessarily mapped to a fixed set of charges | Balance activity and manual transfer reference |
Stripe's reporting options explain that automatic payouts have reconciliation reports, whereas manual payouts may require a different balance-based approach. Do not assume every payout screen is equivalent across account configurations or countries.

Accounting Journal Illustration: Use a Clearing Account
The following is an educational accrual-bookkeeping illustration, not a universal instruction for tax reporting. Assume the $2,030 of invoiced contractor work has been completed and recognized under the business's accounting policy. At invoicing, a common illustration is debit accounts receivable $2,030 and credit services revenue $2,030. The customer payment then clears the receivable rather than creating a second $2,030 of revenue.
| Event | Debit | Credit |
|---|---|---|
| Successful gross customer payments | Processor clearing $2,030.00 | Accounts receivable $2,030.00 |
| Processor fees deducted | Processing fee expense $60.90 | Processor clearing $60.90 |
| Net payout deposited at bank | Bank $1,969.10 | Processor clearing $1,969.10 |
The processor clearing balance reaches zero for these transactions if there are no other movements. Cash-basis accounting and tax returns may require different treatment, timing or classifications. Confirm your workflow with your bookkeeper, especially for customer deposits that may be liabilities before work is earned.
What not to do: Crediting revenue again when the processor payout arrives, recording a fee as a reduction of customer accounts receivable, or booking a $1,969.10 payout as though the customer paid only that much.
Which Stripe Connect Account Holds the Fee?
With a platform such as ProInvoice that uses Stripe Connect, the exact charge and fee flow depends on connected-account configuration and the type of payment. There may be processor fees, possible application fees, transfers or platform-related entries. Do not assume that “the platform” or “the contractor” always bears every fee, or that transactions are booked in a particular account without inspecting the actual connected merchant statement.
Stripe's Standard Connect fee reporting guidance explains how eligible Standard connected accounts can separate Stripe fees from platform application fees in their reports. Export data from the correct merchant account and reconcile it with the real payout destination.
This is financial-record guidance only; it does not require or authorize any changes to payment routing, Stripe configuration, connected account charges or ProInvoice's payment logic.
Common Reconciliation Errors and How to Spot Them
- Using the invoice due date as the payout date: Payment completion, available-on date and bank arrival are separate.
- Applying net to the customer's balance: A $1,250 payment with $37.50 deducted still credits the customer $1,250 when successful.
- Confusing processor fees with platform application fees: Use the actual report columns and connected-account arrangement.
- Refunding an invoice without reconciling the processor: Refunds, dispute adjustments and any refunded processing fees must follow actual provider records, not a made-up formula.
- Counting a batch payout as another customer payment: The bank deposit settles the clearing balance; it does not pay the invoice a second time.
- Assuming every manual payout has a charge list: Stripe's automatic and manual payout reconciliation mechanisms differ.
- Mixing time zones or currencies: Establish consistent cutoffs and retain the original transaction and settlement currency.
Bookkeeper Email: Reconciling a Contractor Payout
Subject: Please reconcile processor payout [Reference] to our job invoices
Hello [Bookkeeper],
I have attached or shared the processor's payout activity and fee report for [Date range], plus the business bank entry. Please match each successful customer payment to its invoice number and job, then identify fees, refunds and any other balance adjustments separately.
For illustration, invoice [A] was paid $1,250 and invoice [B] was paid $780, with example fees totaling $60.90, giving a $1,969.10 net batch if no other activity applies. Please do not reduce customers' payment credits by the processing fee.
Let me know if the expected and actual bank payouts differ or if a charge is on a different connected account. Thank you, [Your name]
Keep an Audit Trail Without Overcomplicating It
One worksheet is often enough for a contractor to diagnose a payout: invoice ID, customer, service date, gross transaction, processor transaction ID, fee amount, net amount, status, payout ID and bank matching date. Export reports from the merchant dashboard for the accounting period rather than relying on screenshots alone.
Keep approvals and change-order documents tied to job invoices, especially when customers make multiple payments over time. If a refund or chargeback occurs, retain both the original charge reference and the later adjustment. For time-limited disputes, follow the current processor instructions and applicable legal requirements rather than a generic “always respond within X days” claim.
A year-end tax review should not rely on the payout total as a shortcut for gross revenue. Work with a qualified tax preparer to distinguish receipts, deposits, earned revenue, fees, refunds and transfers under the actual business accounting method.
Frequently Asked Questions
Why does my customer's $1,250 invoice lead to only $1,212.50 in payout activity?
In the hypothetical example, the processor deducted a $37.50 fee. Confirm the actual fee and any other adjustments before concluding that's the sole reason. The customer still paid $1,250 if the charge succeeded.
Should I bill the customer again for processing fees?
Not automatically. Whether fees can be passed to a customer depends on the contract, payment method, card-network requirements and applicable law. Don't add a surprise surcharge after the customer paid the agreed price.
Can I reconcile a manual payout the same way as an automatic payout?
Not necessarily. Stripe explains that automatic payouts can be tied to sets of balance transactions, whereas manual payouts lack the same built-in charge-to-payout allocation. Use the account's full balance activity when required.
Does a successful charge guarantee bank funds are already available?
No. Payment confirmation, processor settlement, funds availability, payout initiation and bank posting may occur at different times.
What if a customer disputes a previously paid charge?
Record and investigate the dispute based on the processor's actual balance and dispute status. Do not assume the provider refunded the original processing fee or that the invoice must immediately be written off. Consult your bookkeeper where needed.
How do Stripe Connect application fees affect my records?
They depend on who bears fees in the relevant integration, account and charge arrangement. Inspect the applicable account report instead of assuming platform and connected-account entries are interchangeable.
Are processing fees tax-deductible?
Many legitimate business processing costs may qualify as expenses, but treatment, limits and timing depend on the taxpayer and jurisdiction. Ask a qualified tax adviser instead of relying on a universal rule.
Where to Obtain Verified Payout and Fee Data
The most reliable reports come from the merchant dashboard for the account that actually processed the invoice payment. For Stripe, use Fees Report / Balance Summary to see transaction fees, and Payout reconciliation to inspect charges and adjustments in automatic payouts. If the contractor uses a Standard Connect account, consult the application-fee breakdown guidance.
Account features, fee columns and reports vary by account and country. If you're using a different payment processor, look for an equivalent payment-detail export, fee report and payout ledger. Do not rely on an invoice dashboard's “paid” indicator alone to explain the net bank deposit.
Related Guides for ProInvoice Contractors
Read invoice reconciliation and matching payments for general invoice-to-customer workflows, payment versus bank payout for settlement concepts, and tracking balances by job number for follow-up records. ProInvoice features describe supported estimates, invoices and online payment workflows; verify any account-specific reporting feature before relying on it.
Eight-Step Payout Reconciliation Checklist
- Verify which invoices have genuinely successful payments.
- List each gross customer amount and processor transaction ID.
- Export actual fees and account-specific platform charges.
- Find refunds, reserves, disputes, transfers and other adjustments.
- Group transactions only according to the payout method and account reports.
- Compare expected net payout with the bank statement.
- Record fees as a separate expense under your accounting policy and credit the customer's successful gross payment.
- Investigate unexplained differences and maintain references for the accountant.
Remember the two numbers that must not be confused: what the customer paid and what the business received after provider deductions.
