Direct answer: To track a partial contractor deposit, record the amount the customer agreed to pay separately from each amount actually received. Credit the job for confirmed gross payments only, keep pending bank debits out of the paid total, and calculate both the deposit still due and the full project balance after credits. A completed payment is different from a later payout to the contractor's bank, and a requested $900 deposit must never be marked fully paid when only $550 has succeeded.
1. Understand the Deposit Limit Before Billing
A deposit percentage in an estimate is a negotiated contract term, not something that every customer is automatically required by law to pay. Limits depend on the state, project type and agreement. For a covered California residential home-improvement contract, the general maximum initial down payment is the lesser of 10% of the contract price or $1,000, subject to narrow legal exceptions. The California Contractors State License Board explains these rules and the associated written-contract requirements.
On a hypothetical $9,000 covered residential project, 10% is $900, so an agreed initial deposit of $900 is at the general cap. That does not make $900 “required by law.” It is the agreed advance amount under this example's signed contract. Don't assume that buying special-order materials gives the contractor a blanket right to demand more upfront.
For covered California work, progress payments later in the job must be supported by the value of work performed or materials delivered and the agreed written schedule; a second advance cannot be disguised as an invoice for completed work.
2. Keep Five Separate Numbers for Every Job
- Approved contract amount: $9,000 initially in our hypothetical project, before any approved changes.
- Agreed initial deposit: $900, the requested but not necessarily received amount.
- Confirmed deposit payments: Gross payments for which the provider or bank confirms success; $300 and $250 initially.
- Deposit amount still unpaid: $900 − $550 = $350, assuming the original deposit agreement still applies.
- Overall contract balance: $9,000 − $550 = $8,450, before any other approved payments or changes.
These are not interchangeable. The $350 remaining on the deposit is already part of the $8,450 total job balance: it is not an extra $350 to add on top. Keep a separate payment reference for every card, check or bank transfer so duplicates are easy to identify.
3. Build a Deposit Ledger Without Duplicating an Invoice
Choose a bookkeeping workflow compatible with your actual invoicing product: a deposit request linked to the job, a partial payment against an existing invoice, or a deposit liability account that will later be applied to billing. Do not add a second $900 charge to the project total merely to show the deposit due. A customer-facing invoice should always make clear whether a line is an amount billed or a payment credit.
Store these fields: job ID; customer; signed contract reference; requested initial deposit; each transaction's unique processor or check reference; gross amount paid; status; any refund; cumulative successful credits; deposit still due; total unpaid job balance; fee amount; and the separate processor payout reference. Preserve the original contract and any written changes.
QuickBooks' payment help shows how partial payments can be applied against an open invoice in that particular accounting product. Other tools may represent deposits differently. Use actual merchant and bookkeeping records rather than assuming the same fields appear in ProInvoice.
4. First Confirmed Payment: $300 Against a $900 Deposit
Assume the contractor receives and verifies a $300 payment. Save the payment reference and proof of successful processing. This first payment credits $300 against the agreed $900 deposit and the $9,000 total contract, leaving $600 of the requested deposit and $8,700 of the full job unpaid.
Keep the gross $300 customer payment separate from fees the processor might deduct before a payout. A pending authorization or newly initiated ACH transfer should not be treated as another successful payment until the actual processor status confirms success. A receipt should identify the payment received, its date, the related job, and the amount still due according to the contract.
Deposit receipt note: “We received $300 for project [Job/Estimate ID] on [Date], payment reference [ID]. The agreed initial down payment is $900. Confirmed advance payments so far total $300, leaving $600 of the agreed advance and $8,700 of the overall contract amount unpaid, assuming no other credits or changes.”

5. Second Confirmed Payment: $250 and the Running Balance
The homeowner later pays another $250, which is confirmed as successful. The two payments total $550, leaving $350 of the original agreed deposit and $8,450 overall on the contract. This is a hypothetical payment ledger, not a bank statement or a claim about any specific processor's processing fees.
| Event | Gross confirmed payment | Paid to date | Initial deposit still due | Overall job balance |
|---|---|---|---|---|
| Agreement signed | — | $0 | $900 | $9,000 |
| Payment A confirmed | $300 | $300 | $600 | $8,700 |
| Payment B confirmed | $250 | $550 | $350 | $8,450 |
Keep the invoice status appropriately described: a job with $550 confirmed paid is not “fully paid” and the full $900 deposit is not “received.” The remaining deposit amount is part of the outstanding balance, not a separate project surcharge.
6. If the Last $350 ACH Payment Is Still Pending
Suppose the customer starts a $350 bank debit. The processor reports that the debit is processing, not succeeded. That creates a third event record, but it does not immediately increase paid-to-date above $550. The deposit still shows $350 unconfirmed and the overall contract still shows $8,450 remaining, while the pending attempt is tracked separately.
| Payment reference | Amount | Current status | Amount counted as paid |
|---|---|---|---|
| Payment A | $300 | Confirmed successful | $300 |
| Payment B | $250 | Confirmed successful | $250 |
| Payment C | $350 | ACH processing | $0 until successful |
Do not email the customer a second checkout request merely because an ACH payout has not reached the business bank. Inspect the original payment ID and actual state first. If Payment C succeeds, paid-to-date becomes $900, the agreed initial deposit is complete and the remaining overall job amount becomes $8,100. If it fails, it remains unpaid and you should follow a documented, customer-friendly recovery process.
7. Two Balances, One Formula
Initial deposit still due = agreed lawful deposit − confirmed net customer deposit credits, including lawful refunds applied to those credits. Overall job amount still owed = latest approved contract price − confirmed customer payments and valid credits applied once. Do not subtract a promised payment and then subtract it again when the bank transfers it.
Example before Payment C clears: $900 − $550 = $350 of the agreed advance remains; $9,000 − $550 = $8,450 of the overall contract remains. After successful Payment C, the two figures become $0 initial advance remaining and $8,100 overall contract remaining. That $8,100 is not necessarily immediately due on one invoice: actual progress and final billing should follow the contract and applicable law.
8. Processing Fees and Payouts Are Not Another Customer Debt
Suppose, for illustration only, the processor charges a hypothetical $1.20 on Payment A and $1.00 on Payment B. Their gross customer credits remain $300 and $250. The hypothetical combined fee is $2.20, and the combined net amount attributable to the two transactions is $547.80, subject to the processor's payout grouping. These amounts are not stated processor rates.
| Customer transaction | Gross successful payment | Illustrative fee | Illustrative net |
|---|---|---|---|
| A | $300.00 | $1.20 | $298.80 |
| B | $250.00 | $1.00 | $249.00 |
| Total | $550.00 | $2.20 | $547.80 |
Never use $547.80 as the amount the customer paid. It is a hypothetical amount after fees, not the gross amount credited to the job. The merchant's bookkeeper should reconcile fees and bank payouts separately; see how invoice payments reach a business bank account.
9. A $100 Refund Changes the Credit, Not Automatically the Contract
Assume the homeowner was credited for $550 of confirmed advance payments, and a lawful, actually completed refund of $100 is issued. If the underlying $9,000 contract and $900 deposit agreement remain in force, the net customer payment credit becomes $450, the remaining agreed advance becomes $450, and the overall contract balance becomes $8,550. That arithmetic is a bookkeeping illustration, not a finding that the homeowner legally owes a re-requested $100.
If the refund happened because the project was canceled, the contract changed or the customer exercised a legal cancellation right, the agreed price or deposit obligation may also change. Recalculate those contractual rights first instead of automatically trying to recollect the refunded amount. Processor fee refunds, chargebacks and account entries vary; do not invent a fixed “refunded fee” amount. Ask a qualified bookkeeper how the refund and associated liability or receivable should be classified.
Bookkeeper note: “For Job [ID], deposits initially confirmed totaled $550. A $100 customer refund was completed, so net successful customer credits currently total $450. Check whether the signed agreement remains active before calculating what is lawfully due. Investigate any processor fees or return adjustments using the actual merchant statement.”
10. Signed Change Order: A Revised Contract Price Is Not a New Advance
Suppose the customer approves an additional $400 of work in a properly signed change order. The revised contract is $9,400. If $550 in payments has been confirmed and no other adjustments have occurred, the total amount outstanding is $9,400 − $550 = $8,850. That is the overall job balance, not an invoice demanding immediate payment for all unfinished work.
Do not automatically increase the original $900 initial deposit because the new contract price is larger. For covered California home-improvement work, the initial down-payment limitation and later progress-payment rules still apply; additional payments must be tied to actual completed work or delivered materials under a valid written schedule. A newly signed change order is not, by itself, evidence that the extra work has already been performed.

11. Practical Monthly Reconciliation
- Export each job's latest approved contract total and documented changes.
- List the customer's deposit request amount and every actual payment ID, check number or bank reference.
- Compare each successful payment to the merchant or bank record and ensure the same transaction was not applied twice.
- Keep processing and failed ACH attempts as separate statuses; do not post those amounts as cash collected.
- Review refunds, returns, chargebacks and any payment credits reversed after their initial entry.
- Recalculate deposit still due and total contract balance independently.
- Confirm that later milestone payments reflect the signed contract and applicable work-performed or materials-delivered rule.
- Reconcile gross payments and processor fees against net payouts separately.
- Investigate every unexplained difference instead of posting a miscellaneous “rounding” adjustment without evidence.
For each discrepancy, record the date, job ID, transaction ID, statement amount, investigation and resolution. A rejected ACH that appears in a later accounting period may require a payment-reversal entry even when the prior month's job ledger looked correct.
12. Customer Message: Request Only the Agreed Balance When Appropriate
Subject: Deposit balance for estimate [Number]
Hello [Customer], thank you for your payments of $300 and $250 toward the agreed $900 initial deposit on [Job]. We have verified a total of $550 received, leaving $350 of the original agreed advance outstanding. Our current records show no other completed payment toward this amount.
If the project has not begun, the agreement remains valid and no payment is already pending, please use the actual supported payment method attached to your original estimate to complete the agreed balance by [Mutually agreed date]. If you already started a transfer, please tell us its reference so we can check before sending any duplicate request.
Thank you, [Business name and contact]
Do not reuse this template without checking whether a bank debit is processing, a refund changed the agreement, the work has started or local rules limit advance payments. The message is a sample for a specific hypothetical situation, not a universal collection instruction.
13. A Bookkeeper's Clean Deposit Event Log
| Event | Amount | Classification | Customer credit after event |
|---|---|---|---|
| Deposit agreement signed | $900 requested | No cash received merely by requesting it | $0 |
| Payment A succeeds | $300 | Payment received, job credit | $300 |
| Payment B succeeds | $250 | Payment received, job credit | $550 |
| Payment C processing | $350 pending | Not yet successful | $550 |
| Payment C later succeeds | $350 | Payment received, job credit | $900 |
This table illustrates a single sequence in which Payment C later succeeds. Do not combine it with the separate $100 refund or $400 change-order scenarios as though every event happened in the same ledger. If Payment C fails, cumulative customer credits stay at $550 and the outstanding deposit remains $350, subject to any actual changes in contract status.
The bookkeeper may use a customer-deposit liability or another appropriate accounting treatment depending on the software, whether work has been earned, and applicable accounting and tax rules. Do not make automatic tax conclusions based solely on the name “deposit.”
14. Frequently Asked Questions
Can I demand more than 10% upfront for a California home-improvement job?
For covered residential home-improvement contracts, the general initial down-payment limit is the lesser of 10% of the contract price or $1,000, with narrow statutory exceptions. The limit is not an amount the homeowner must pay; it is a cap on what the contractor may generally request upfront.
Should I create a new invoice for each partial payment?
Not necessarily. Many accounting tools support recording multiple payments against an existing invoice. Choose one deposit representation and record each received payment without accidentally creating a second $900 receivable.
What happens if the pending ACH later fails?
Keep the attempted $350 payment from being credited as successful. Verify the processor's actual failure state and avoid retrying or recharging twice without proper authorization.
Can I keep a customer's $100 refund for material costs?
Never assume that. Refund and cancellation rights depend on the contract and applicable law. A special-order purchase does not automatically create an exception to California's down-payment cap or all refund obligations.
Does an approved change order automatically raise the initial deposit?
No. Recheck the legal payment limits and written schedule. An added $400 in approved scope does not mean the contractor may simply demand $400 more upfront before work or materials are delivered.
How does QuickBooks record partial invoice payments?
Intuit's QuickBooks instructions describe recording and allocating amounts received toward open invoices. That workflow is specific to its product; a different invoicing tool may use a deposit balance or customer credit mechanism.
What if the bank payout is lower than the gross deposit?
Reconcile the processor's actual fees and adjustments separately. The customer is ordinarily credited for the successful gross payment even if the merchant's later bank payout is net of fees.
15. A Simple Spreadsheet If Your Software Does Not Track This Automatically
Use a separate row for each payment event and columns for job, signed contract version, agreed deposit, payment method, transaction ID, gross payment amount, processor status, refund, cumulative confirmed credits, deposit balance, entire project balance and later bank payout reference. A pending event should not increase the cumulative confirmed payment total.
For a small crew, review the ledger when an estimate is accepted, at every confirmed payment, after every lawful refund or change, and before sending a final invoice. Save copies of the actual merchant statement and customer acceptance terms. Where account features are limited, this manual record can prevent overbilling without inventing software automation.
ProInvoice offers estimates and invoicing workflows and supported online payment options through configured merchant accounts. Verify which deposit and partial-payment controls your account actually exposes rather than assuming native webhook processing or automatic accounting reconciliation.
Bottom Line: Requested, Confirmed and Pending Are Different
The $900 deposit in our example was a contractual advance request, not an automatic $900 credit. After two successful partial payments totaling $550, the customer still has $350 of that agreed deposit unconfirmed and $8,450 left on the $9,000 contract. An uncompleted bank debit is still pending; a confirmed payment receives its full gross credit; a later processor payout is a separate business-bank event.
Before the next invoice, use the paid-deposit final invoice guide and deposit versus final invoice explanation to ensure each customer payment is applied once.
